Sunday, 21 August 2011

Canadian National - More basket case Genesis bargains.


My latest ebay bargain, a pair of Athearn Genesis SD70i locomotives in Canadian National livery.  These are both definitely borderline basket cases, but at only £20 each I think they were worth picking up.

One of them is running rough and the other is missing it's motor, but the shells and trucks are in good condition, and I already have several sets of SD70 handrails 'in stock' so getting them back to complete detail order should be fairly simple.  These are early Genesis engines from around 1999 so they have bare metal handrails and need holes drilled for the windscreen wipers and other details.

I have already ordered a cheap replacement motor for the missing one, and I figure a single evening with the screwdriver and some glue should see both engines back on the rails and ready to haul.

These are the first CN engines to join my roster, and they should run nicely alongside my Norfolk Southern units.  I will update on them once the repairs are underway, but in the meantime I need to find a suitable orange paint colour to finish the handrails and grabirons without ordering some floquil from the states.

Wednesday, 17 August 2011

Dashing... but the wrong livery.



I recieved another round of ebay purchases this week.  I picked up an Atlas Silver Series GE Dash 8-40CW locomotive in Union Pacific livery, this is not my road, but I plan to repaint it as a Conrail unit and then patch for Norfolk Southern.  The locomotive is brand new, fully boxed and complete with it's detail parts and handrails.

I've ordered a conrail hood to swap out for the UP one.  It's a shame to strip this locomotive as the factory paint is really crisp and detailed, so I am also investigating the possibility of finding an entire Conrail shell to use instead.



I also picked up a cheap Railpower SD60M shell, which will be painted and detailed for Norfolk Southern to accompany my Genesis model.



Freight-wise, I picked up a very nice Genesis 50ft boxcar and a Maersk Maxi I well car set - the intermodal cars will form part of a set to be pulled by my Athearn GP60M.


So the collection grows again, and the stack of projects is now officially far too big!  I need to get back to my GP38-2 project and get that finished off before sorting out the CSX SD70M and then getting down to the remainder of the various project locomotives I now have sitting in boxes.  Plenty to keep me occupied through the winter, that is for sure!

Tuesday, 2 August 2011

Board with tracklaying?



A quick update on my Fremo module.  With the track finally in place, the board is at least looking a little more like part of a road instead of a table!

Today I purchased a couple of cheap foam insulation boards from B&Q to use as the base for the scenery on my Fremo module.  I'm following the methods outlined in the September 2010 issue of model railroader, and I will carve the foam into shape before adding a layer of Woodland Scenics plaster on top.



I spent twenty mins or so carving the first section, where the landscape will slope down from the road on the 'left' side of ther module (it's designed to be viewed from either side, but I consider the current position to be the 'correct' way to view the module).



The foam carves easily, but I will need to take a larger saw over to the clubhouse next time, the hacksaw blade I was using is not really suitable for large cuts.

I want to get the scenery blocked out and the road surfaces laid before I begin work on the buildings, currently there is a box full of scenic bits under my board which includes all the houses and stores for the main street which will take up the 'right' side of the board, and the Walthers farmhouse that will be the main scenic detail on the hill above the tracks.

The finished board will be a very simple 4ft section of single-track main line, with a cutting and old wooden overbridge at one end and a suggestion of a small town at the other, with a grade crossing.

Sunday, 24 July 2011

Decals aren't what they used to be...



Time for an update on my ex-conrail GP38-2, today I spent some time applying the main decals, I am adding them ahead of the weathering and other paint detailing on the shell.

I'm using some very nice Microscale decals which I bought from ebay, but unfortunately they are either old, or have got damp at some point, because they are proving almost impossible to seperate from the backing paper, and even when they do finally slide loose, they are often breaking into pieces.  I have gone through about three engines worth of decals just to get the Conrail logos onto the sides of the long hood.

In comparison, the patches and numbers were a piece of cake, those decals came from a brand new set I purchased directly from Microscale mail order, and I think that really demonstrates that second-hand decals simply aren't worth bothering with.

In other news, I got the Digitrax sound decoder fitted to the shell and had the engine running round my test track making all kinds of noises... but then when I tested it a second time the decoder literally went up in smoke!  Not a good thing.  So I am back to square one on the DCC side of things for this engine, I still want to get a sound decoder fitted to it, but I will need to get the chassis looked at before I risk another chip in it.

Friday, 8 July 2011

Fifty Footers and Sixty M's



I found an Athearn GP60M in the promotional 'Maersk' livery going cheap on ebay and snapped it up, I am going to get some matching stack cars and put together a version of the special one-off photography special train that ran through Cajon Pass back in 1990.





I also received my new Bachmann GE44 Ton switcher.  This was a locomotive that I ordered from my local hobby shop, Junction Models at Norwood Junction.  I could have got it cheaper ordering direct, or from ebay, but I wanted to try and support my local independent store as much as I can.

This engine is intended to be part of the roster for my Detroit Connecting Railroad module, and will join the Bachmann GE 70 Ton switcher I bought earlier in the year.







These are my latest trio of boxcars, two kit-built and another Walther Goldline with some very nice details.  They are also intended to be part of my switching layout module, and will probably be patched and given some extra rust and damage.

I did bid on a pre-built exhibition layout on ebay this month but didn't win, however the construction methods for that layout have inspired me to push forward with my modular switching layout.  More on that soon.

Tuesday, 14 June 2011

Brand new toys!

So following my visit to Charles Ro Supply Co. yesterday, here's a quick look at what I picked up.  I purchased my first ever brand-new Genesis locomotive - an SD60M in Norfolk Southern colours.


This is a beautifully detailed locomotive, and it is the top-of-the-range version, complete with sound and factory fitted details.  I have resisted the urge to take it out of it's packaging, and I'm looking forward to my next visit to the clubroom to give it a run and get the decoder programmed for the correct running number.



I also picked up two Walthers front-runner cars with truck trailers, these will give a modern slant to my in-progress TTX set which are stripped and repainted Athearn Impack cars.  I am considering painting one of the Impack sets in the more modern black and yellow paint scheme these cars feature.



I also picked up a selection of detail parts, including some wheels for my Impack cars and some DPM and Rix parts.  These are the most exciting items, as they are so difficult to get back home.  I am still considering a return trip just to buy more of these.  If it is raining heavily on any of the days I am here in Boston, then I will most likely pop over to Malden again to add to my stash.

Monday, 13 June 2011

Direct from the source...



So today was my first visit to an American model railroad store.  I'm in Boston on business and I googled around before I left the UK and I found a single hobby store close to the city.  It is the Charles Ro Supply Store, one of the largest O Gauge suppliers in the US.



I took a T train out from Boston early this morning, for a few miles to a town in the suburbs called Malden, and then a short walk got me to the store just after it opened.  It wasn't difficult to find, and it sits alone with it's own large car park.



I'd e-mailed the store a couple of times and been told that they stocked a large range of HO, but their website http://www.charlesro.com/welcome_to_charles_ro.htm only lists O Gauge or S Gauge so I wasn't sure if they would have what I wanted.



As it turned out, I needn't have worried, the store was not only large, but it also stocked a massive range of N and Ho alongside the American Flyer and other large scale brands.

I spent around forty minutes browsing and picked up several new items, which I will update on in another post.





Upstairs the store has a large display layout behind glass, and I was able to take a look at that and take a few pictures, and then I was presented with a Charles Ro T-Shirt as I was leaving.  All in all, an excellent and friendly store with a good selection of stock and prices.

I'm in Boston for a few days yet, so my main problem will be resisting the urge to go back to the store and buy more goodies!